V Product Data Sheet Vandalite Lighting Ltd PREFECT ? Angled Reflector Surface Fluorescent Range Durable slimline steel construction High quality components Epoxy polyester powder coat Angled metal trough reflector Description A range of fluorescent luminaires suitable for commercial and industrial. The luminaire may be surface mounted, conduit or chain suspended. The slimline body is made from durable steel which gives improved rigidity. The fitting has high impac resistant moulded lamp holder end cap assemblies and replacement lampholders are also available. The battens have twist lock fasteners to allow opening and closing of the cover for installation and maintenance without the use of any tools. The luminaire is epoxy polyester powder coated in white gloss. The end caps are UV stabilised non discolouring and are high impact resistant. The fitting has an angled metal trough reflector with a white powder coated smooth, resilient finish for general industrial lighting. All switchstart luminaires are supplied with a power correction capacitor as standard. All luminaires in this range are designed to comply with BS EN 60598 and are suitable for operating in interior applications. Each luminaire also complies with European Directive 89/336/EEC and carries the CE mark. IP20 T8 PRODUCTS AVAILABLE CatalogueNo. Description PFTA 136 36W 4ft/1200mm single batten ? angled reflector PFTA 158 58W 5ft/1500mm single batten - angled reflector PFTA 170 70W 6ft/1800mm single batten - angled reflector PFTA 236 36W 4ft/1200mm twin batten - angled reflector PFTA 258 58W 5ft/1500mm twin batten - angled reflector PFTA 270 70W 6ft/1800mm twin batten - angled reflector /ES  electronic starterswitches /HF high frequency control gear /EM 3 hour maintained emergency /WG  protective wireguard 80 80 Dimensions Applications The PREFECT ANGLED REFLECTOR range of luminaires is suitable for ceiling mounting in most high racking and storage lighting applications. Directional industrial lighting Pelmet lighting Blackboard lighting in schools & colleges Factories Warehouses Maintenance For best results do not use abrasives or highly alkaline cleaners on the fittings. Do not use squeegees, razor blades or other sharp instruments. Do not clean the diffuser in hot sun or elevated temperatures. To remove labels, stickers etc., from the diffuser the use of kerosene, naphtha or white spirit is generally effective. Generally speaking, a re-lamping and cleaning programme every 12 to 36 months is advisable depending on hours of use. Standards All luminaires in the PREFECT ANGLED REFLECTOR range are designed and manufactured in accordance with the relevant sections of BS EN 60598. In addition, they comply with the requirements of European Directive 89/336/EEC and carry the CE mark. Each and every fitting undergoes stringent testing in excess of that required under the standard, to ensure that any possibility of luminaires arriving on site in anything other than full working order is kept to an absolute minimum. Technical Advice Our Technical Department would be pleased to advise customers with regard to any technical aspect of Vandalite luminaires. This includes a design service using state-of-the-art computer software, or manual calculations to ensure that each project receives the correct attention for the job. All information, recommendation, or advice contained in this document or given by Vandalite Lighting Ltd., or an of its subsidiaries, affiliates, or authorised representatives, whether written or oral, is given in good faith, to the best of its knowledge, and based on current procedures in effect. The products of Vandalite Lighting Ltd. or if applicable, of its subsidiaries or affiliates are sold subject to Gener a Conditions of Sale printed at the rear of the currentcatalogue or available upon request. Nothing in this or any other document shall alter, vary or supersede, or operate to waive any of the General Conditions of Sale. Each user of the products shall convince themselves, through all available sources (including finished product test ing in its appropriate environment) of the suitability of the products supplied for its own particular purpose. Because actual use of the products by the user is beyond the control of Vandalite Lighting Ltd., its subsidiaries and affiliates, such use is within the exclusive responsibility of the user. Vandalite Lighting Ltd., its subsidiaries and affiliates cannot be held responsible for any loss incurred through incorrect or faulty use of the products. Information, recommendation and / or advice are neither made to infringe on any patents, nor to grant a license under any patent or intellectual property right of Vandalite Lighting Ltd. Or any of its subsidiaries or affiliated companies, nor to grant the right to file for any patent protection. We have a policy of continuous technical development and products and / or descriptions, and / or materials may be changed without prior public announcement or warning. Vandalite Lighting  Ltd. Haley Hill Works Haley Hill Halifax West Yorkshire                  Tel: 01422 354254 HX3 6ED   Fax: 01422 356066 e-mail:enquiries@vandalite.com web site:www.vandalite.com V Vandalite Lighting  Ltd.