V Product Data Sheet Vandalite Lighting Ltd PATROL ? Wall pack Exterior Lighting Range Computer designed Polycarbonate lens Injection moulded body Easy maintenance Various mounting options Excellent Photometric performance Description The PATROL range of exterior IP65 wall pack luminaires is suitable for many external lighting applications. The injection-moulded body is available in black finish only. The fitting comes with a reeded prism lens or a clear lens. The Polycarbonate prism lens is held in place by six self-tapping screws and is resilienttoattack. The prism structure was designed specifically by Vandalite R & D department to produce excellent lateral distribution, thereby increasing illuminance levels between adjacent fittings. The lens is sealed to the body with a rubber gasket. The geartray is manufactured from galvanised steel and acts as a reflector. It is also removable for ease of maintenance. Versions areavailable using high efficacy and compact fluorescent lamps. The advantage of the latter is that they produce virtually instantaneous light and have a long life. To increase energy efficiency, an electronic photocell can be fitted at extra cost. All luminaires in this range are designed to comply with BS EN 60598 and are suitable for operating in interior applications. Each luminaire also complies with European Directive 89/336/EEC and carries the CE mark. PRODUCTS AVAILABLE CatalogueNo. Description PAT 50S 50W high pressure sodium PAT 70S 70W high pressure sodium PAT 218PL 2x18WPLLcompactfluorescent PAT 282D 28W 2D compact fluorescent PAT 382D 38W 2D compact fluorescent PAT 50M 50W mercury          /CL        clear dished polycarb lens PAT 80M 80W mercury          /PR        polycarbonate reeded lens          /PC        integral dusk to dawn photocell IP65 350 275 195 Dimensions Applications The PATROL range of luminaires is suitable for use in many outdoor applications. The unique design ensures that all versions are resilient to attack and are designed for areas where vandalism is infrequent. Such areas could be: Public parking areas Circulation areas Amenity lighting in Public parks Pedestrian precincts Shopping malls Perimeters of Public buildings Exteriors of Commercial buildings Path and access road lighting Maintenance For best results do not use abrasives or highly alkaline cleaners on the fittings. Do not use squeegees, razor blades or other sharp instruments. Do not clean the diffuser in hot sun or elevated temperatures. For removal of paints, marker pens, inks, lipstick etc., use Butyl Cellusolve on lens only. To remove labels, stickers etc., from the diffuser the use of kerosene, naphtha or white spirit is generally effective. After cleaning a final warm wash should be made using a mild soap solution and ending with a thorough rinse with cold water. Wipe off surface moisture from metalwork. Generally speaking, if the luminaires operate only in the hours of darkness, a re-lamping and cleaning programme every 12 to 36 months is advisable depending on which type of lamp is used. Standards All luminaires in the PATROL range are designed and manufactured in accordance with the relevant sections of BS EN 60598. In addition, they comply with the requirements of European Directive 89/336/EEC and carry the CE mark. Each and every fitting undergoes stringent testing in excess of that required under the standard, to ensure that any possibility of luminaires arriving on site in anything other than full working order is kept to an absolute minimum. Technical Advice Our Technical Department would be pleased to advise customers with regard to any technical aspect of Vandalite luminaires. This includes a design service using state-of-the-art computer software, or manual calculations to ensure that each project receives the correct attention for the job. All information, recommendation, or advice contained in this document or given by Vandalite Lighting Ltd., or an of its subsidiaries, affiliates, or authorised representatives, whether written or oral, is given in good faith, to the best of its knowledge, and based on current procedures in effect. The products of Vandalite Lighting Ltd. or if applicable, of its subsidiaries or affiliates are sold subject to Gener a Conditions of Sale printed at the rear of the currentcatalogue or available upon request. Nothing in this or any other document shall alter, vary or supersede, or operate to waive any of the General Conditions of Sale. Each user of the products shall convince themselves, through all available sources (including finished product test ing in its appropriate environment) of the suitability of the products supplied for its own particular purpose. Because actual use of the products by the user is beyond the control of Vandalite Lighting Ltd., its subsidiaries and affiliates, such use is within the exclusive responsibility of the user. Vandalite Lighting Ltd., its subsidiaries and affiliates cannot be held responsible for any loss incurred through incorrect or faulty use of the products. Information, recommendation and / or advice are neither made to infringe on any patents, nor to grant a license under any patent or intellectual property right of Vandalite Lighting Ltd. Or any of its subsidiaries or affiliated companies, nor to grant the right to file for any patent protection. We have a policy of continuous technical development and products and / or descriptions, and / or materials may be changed without prior public announcement or warning. VandaliteLightingLtd. Haley Hill Works Haley Hill Halifax West Yorkshire                  Tel: 01422 354254 HX3 6ED   Fax: 01422 356066 e-mail:enquiries@vandalite.com web site:www.vandalite.com V Vandalite Lighting  Ltd.