V Product Data Sheet Vandalite Lighting Ltd ORKNEY ? Exterior Lighting Range Vandal Resistant Polycarbonate lens Anti-light pollution design Easy maintenance Various mounting options Description The ORKNEY range of heavy duty exterior IP65 street lamps is suitable for many external lighting applications where control of light pollution is necessary. The body is made from rugged heavy duty die-cast aluminium and has a textured black EPC paint finish as standard. The internal components are arranged for the coolest operation. The reflector is made from high purity anodised aluminium and the lens is made from tempered clear glass. The fitting is suitable for mounting at heights between 6 and 12 metres. The luminaire is available with a fixed, twin, or adjustable single mounting bracket. All luminaires in this range are designed to comply with BS EN 60598 and are suitable for operating in interior applications. Each luminaire also complies with European Directives 89/336/EEC and 73/23/EEC, and carries the CE mark. PRODUCTS AVAILABLE Catalogue No. Description ORK 100S 100W SON lantern ORK 150S 150W SON lantern ORK 250S 250W SON lantern ORK 250M 250W mercury lantern ORK 250MH 250W metal halide lantern /PC integral dusk to dawn photocell IP65 170 420 135 435 Dimensions Applications The ORKNEY range of heavy duty exterior IP65 lanterns is suitable for many external lighting applications where upward light pollution control is necessary. The design is aesthetically pleasing but sturdy. Such areas could be: Public parking areas and car parks Access roads Security lighting applications Pedestrian precincts Shopping malls Perimeters of Public buildings Exteriors of Commercial buildings Path and access road lighting Maintenance For best results do not use abrasives or highly alkaline cleaners on the fittings. Do not use squeegees, razor blades or other sharp instruments. Do not clean the diffuser in hot sun or elevated temperatures. For removal of paints, marker pens, inks, lipstick etc., use Butyl Cellusolve on lens only. To remove labels, stickers etc., from the diffuser the use of kerosene, naphtha or white spirit is generally effective. After cleaning a final warm wash should be made using a mild soap solution and ending with a thorough rinse with cold water. Wipe off surface moisture from metalwork. Generally speaking, if the luminaires operate only in the hours of darkness, a re-lamping and cleaning programme every 12 to 36 months is advisable depending on which type of lamp is used. SON and Metal Halide lamps must be replaced before end of life to prevent damage to gear and bodies. Standards All luminaires in the ORKNEY range are designed and manufactured in accordance with the relevant sections of BS EN 60598. In addition, they comply with the requirements of European Directives 89/336/EEC and 73/23/EEC, and carry the CE mark. Each and every fitting undergoes stringent testing in excess of that required under the standard, to ensure that any possibility of luminaires arriving on site in anything other than full working order is kept to an absolute minimum. Technical Advice Our Technical Department would be pleased to advise customers with regard to any technical aspect of Vandalite luminaires. This includes a design service using state-of-the-art computer software, or manual calculations to ensure that each project is both technically and aesthetically correct.. All information, recommendation, or advice contained in this document or given by Vandalite Lighting Ltd., or an of its subsidiaries, affiliates, or authorised representatives, whether written or oral, is given in good faith, to the best of its knowledge, and based on current procedures in effect. The products of Vandalite Lighting Ltd. or if applicable, of its subsidiaries or affiliates are sold subject to Gener a Conditions of Sale printed at the rear of the currentcatalogue or available upon request. Nothing in this or any other document shall alter, vary or supersede, or operate to waive any of the General Conditions of Sale. Each user of the products shall convince themselves, through all available sources (including finished product test ing in its appropriate environment) of the suitability of the products supplied for its own particular purpose. Because actual use of the products by the user is beyond the control of Vandalite Lighting Ltd., its subsidiaries and affiliates, such use is within the exclusive responsibility of the user. Vandalite Lighting Ltd., its subsidiaries and affiliates cannot be held responsible for any loss incurred through incorrect or faulty use of the products. Information, recommendation and / or advice are neither made to infringe on any patents, nor to grant a license under any patent or intellectual property right of Vandalite Lighting Ltd. Or any of its subsidiaries or affiliated companies, nor to grant the right to file for any patent protection. We have a policy of continuous technical development and products and / or descriptions, and / or materials may be changed without prior public announcement or warning. Vandalite Lighting  Ltd. Haley Hill Works Haley Hill Halifax West Yorkshire                  Tel: 01422 354254 HX3 6ED   Fax: 01422 356066 e-mail:enquiries@vandalite.com web site:www.vandalite.com V Vandalite Lighting  Ltd.