V Product Data Sheet Vandalite Lighting Ltd COMET Floodlighting Range Strong exterior floodlight Steel adjustable stirrup bracket Sealed to IP65 Excellent Photometric Performance Description The COMET range of exterior IP65 floodlights are suitable for many external lighting applications. The plastic body is available in black only as standard. The floodlight comes with integral stirrup type mounting bracket for vertical plane adjustment. The thick clear injection moulded Polycarbonate lens is held in place by six securing screws and is very resilient to attack. The lens is sealed to the body with a neoprene gasket. The geartray is manufactured from galvanised steel and is removable for ease of maintenance. The reflector is formed from aluminium and is easily removable to facilitate access to the geartray. Versions are available using long life, high efficacy discharge lamps such as High Pressure Sodium and Mercury. An electronic miniature photocell can be fitted as an optional extra. All luminaires in this range are designed to comply with BS EN 60598 and are suitable for operating in exterior applications. Each luminaire also complies with European Directive 89/336/EEC and carries the CE mark. IP65 PRODUCTS AVAILABLE CatalogueNo. Description CMT 50S 50W high pressure sodium CMT 70S 70W high pressure sodium CMT 110S 110W high pressure sodium CMT 70MH 70W metal halide CMT 50M 50W mercury CMT 80M 80W mercury CMT 125M 125Wmercury /PC integral dusk to dawn cell /PCKIT remote photocell kit for multi-lamp use Various surface and pole mounting options are available to complement the Comet range. Dimensions 300 200 40 Applications The COMET range of luminaires is suitable for use in many exterior applications. The unique design ensures that all versions are resilient and are therefore suited to use in areas where vandalism is prevalent. Such areas could be: Public parking areas Access road lighting Decorative lighting in parks Pedestrian precincts Shopping centres Perimeters of public buildings Exteriors of Football grounds Sign and building lighting Maintenance For best results do not use abrasives or highly alkaline cleaners on the fittings. Do not use squeegees, razor blades or other sharp instruments. Do not clean the diffuser in hot sun or elevated temperatures. For removal of paints, marker pens, inks, lipstick etc., use Butyl Cellusolve on diffuser only. To remove labels, stickers etc., from the diffuser the use of kerosene, naphtha or white spirit is generally effective. After cleaning a final warm wash should be made using a mild soap solution and ending with a thorough rinse with cold water. Wipe off surface moisture from metalwork. Generally speaking, if the luminaires operate only in the hours of darkness, a re-lamping and cleaning programme every 12 to 36 months is advisable depending on which type of lamp is used. It must be noted that High Pressure Sodium and Metal Halide lamps should be replaced before cycling occurs to prevent damage to the luminaire and control gear. Standards All luminaires in the COMET range are designed and manufactured in accordance with the relevant sections of BS EN 60598. In addition, they comply with the requirements of European Directive 89/336/EEC and carry the CE mark. Each and every fitting undergoes stringent testing in excess of that required under the standard, to ensure that any possibility of luminaires arriving on site in anything other than full working order is kept to an absolute minimum. Technical Advice Our Technical Department would be pleased to advise customers with regard to any technical aspect of Vandalite luminaires. This includes a design service using state-of-the-art computer software, or manual calculations to ensure that each project receives the correct attention for the job. All information, recommendation, or advice contained in this document or given by Vandalite Lighting Ltd., or an of its subsidiaries, affiliates, or authorised representatives, whether written or oral, is given in good faith, to the best of its knowledge, and based on current procedures in effect. The products of Vandalite Lighting Ltd. or if applicable, of its subsidiaries or affiliates are sold subject to Gener a Conditions of Sale printed at the rear of the currentcatalogue or available upon request. Nothing in this or any other document shall alter, vary or supersede, or operate to waive any of the General Conditions of Sale. Each user of the products shall convince themselves, through all available sources (including finished product test ing in its appropriate environment) of the suitability of the products supplied for its own particular purpose. Because actual use of the products by the user is beyond the control of Vandalite Lighting Ltd., its subsidiaries and affiliates, such use is within the exclusive responsibility of the user. Vandalite Lighting Ltd., its subsidiaries and affiliates cannot be held responsible for any loss incurred through incorrect or faulty use of the products. Information, recommendation and / or advice are neither made to infringe on any patents, nor to grant a license under any patent or intellectual property right of Vandalite Lighting Ltd. Or any of its subsidiaries or affiliated companies, nor to grant the right to file for any patent protection. We have a policy of continuous technical development and products and / or descriptions, and / or materials may be changed without prior public announcement or warning. Vandalite Lighting  Ltd. Haley Hill Works Haley Hill Halifax West Yorkshire                  Tel: 01422 354254 HX3 6ED   Fax: 01422 356066 e-mail:enquiries@vandalite.com web site:www.vandalite.com V Vandalite Lighting  Ltd.