V Product Data Sheet Vandalite Lighting Ltd CHALLENGER ? Wall pack Exterior Lighting Range Computer designed Polycarbonate lens Cast alloy body High security stainless steel screws Various mounting options Excellent Photometric performance Description The CHALLENGER range of exterior IP65 wall pack luminaires is suitable for many external lighting applications. The cast alloy body is available in black textured finish as standard. The fitting comes with a black top clear reeded prism lens. The polycarbonate clear reeded prism lens is held in place by six high security screws and is extremely resilient to attack. The prism structure was designed by Vandalite R & D department to produce excellent lateral distribution, thereby increasing illuminance levels between adjacent fittings. The lens has an environmentally friendly blackened top section to reduce unwanted upward light pollution. The lens is sealed to the body with a neoprene gasket to give IP65 protection. The geartray is manufactured from galvanised steel and acts as a reflector. It is also removable for ease of maintenance. Versions are available using high efficacy discharge and compact fluorescent lamps. The advantage of the latter is that they produce virtually instantaneous light as well as having a long life. All luminaires in this range are designed to comply with BS EN 60598 and are suitable for operating in exterior applications. Each luminaire also complies with European Directive 89/336/EEC and carries the CE mark. PRODUCTS AVAILABLE CatalogueNo. Description CLR 50S 50W high pressure sodium CLR 70S 70W high pressure sodium CLR 50M 50Wmercury CLR 80M 80Wmercury CLR 218PL 2x18WPLLcompactfluorescent CLR 282D 28W 2D compact fluorescent CLR 382D 38W 2D compact fluorescent /PC integral dusk to dawn photocell IP65 280 355 205 Dimensions Applications The CHALLENGER range of luminaires is suitable for use in many outdoor applications. The unique design ensures that all versions are extremely resilient to attack and can be used in areas where vandalism is prevalent. Such areas could be: Public parking areas Circulation areas Amenity lighting in Public Parks Pedestrian precincts Shopping malls Perimeters of public buildings Exteriors of Football grounds Path and access road lighting Maintenance For best results do not use abrasives or highly alkaline cleaners on the fittings. Do not use squeegees, razor blades or other sharp instruments. Do not clean the diffuser in hot sun or elevated temperatures. For removal of paints, marker pens, inks, lipstick etc., use Butyl Cellusolve on lens only. To remove labels, stickers etc., from the diffuser the use of kerosene, naphtha or white spirit is generally effective. After cleaning a final warm wash should be made using a mild soap solution and ending with a thorough rinse with cold water. Wipe off surface moisture from metalwork. Generally speaking, if the luminaires operate only in the hours of darkness, a re-lamping and cleaning programme every 12 to 36 months is advisable depending on which type of lamp is used. Standards All luminaires in the CHALLENGER range are designed and manufactured in accordance with the relevant sections of BS EN 60598. In addition, they comply with the requirements of European Directive 89/336/EEC and carry the CE mark. Each and every fitting undergoes stringent testing in excess of that required under the standard, to ensure that any possibility ofluminairesarrivingon site in anything other than full working order is kept to an absolute minimum. All information, recommendation, or advice contained in this document or given by Vandalite Lighting Ltd., or an of its subsidiaries, affiliates, or authorised representatives, whether written or oral, is given in good faith, to the best of its knowledge, and based on current procedures in effect. The products of Vandalite Lighting Ltd. or if applicable, of its subsidiaries or affiliates are sold subject to Gener a Conditions of Sale printed at the rear of the currentcatalogue or available upon request. Nothing in this or any other document shall alter, vary or supersede, or operate to waive any of the General Conditions of Sale. Each user of the products shall convince themselves, through all available sources (including finished product test ing in its appropriate environment) of the suitability of the products supplied for its own particular purpose. Because actual use of the products by the user is beyond the control of Vandalite Lighting Ltd., its subsidiaries and affiliates, such use is within the exclusive responsibility of the user. Vandalite Lighting Ltd., its subsidiaries and affiliates cannot be held responsible for any loss incurred through incorrect or faulty use of the products. Information, recommendation and / or advice are neither made to infringe on any patents, nor to grant a license under any patent or intellectual property right of Vandalite Lighting Ltd. Or any of its subsidiaries or affiliated companies, nor to grant the right to file for any patent protection. We have a policy of continuous technical development and products and / or descriptions, and / or materials may be changed without prior public announcement or warning. Vandalite Lighting  Ltd. Haley Hill Works Haley Hill Halifax West Yorkshire                  Tel: 01422 354254 HX3 6ED   Fax: 01422 356066 e-mail:enquiries@vandalite.com web site:www.vandalite.com V Vandalite Lighting  Ltd.