V Product Data Sheet Vandalite Lighting Ltd BLOCK High Security Lighting Steel body and frame Virtually unbreakable diffuser High security stainless steel bolts Rear access for easy maintenance Excellent photometric performance Description The BLOCK range of special vandal resistant atrium floodlight luminaires is designed for use in high level cell block circulation areas. The body is made from sheet steel and EPC painted in textured white as standard. The luminaires are approved for use in HM Prison atrium areas by Home Office engineers. The diffuser is made from thick clear reeded polycarbonate which is virtually indestructible and can withstand repeated blows. The controller is held in a steel frame and gasketed to prevent ingress of both water and dust. The geartray is made from mild steel and finished with an EPC coat in white. It is removable and also acts as a reflector. Versions using the Philips QL induction lamps have an average rated maintenance period of up to 60,000 hours, or 15 years at 4,000 hours per year. All luminaires in this range are designed to comply with BS EN 60598 and are suitable for operating in interior and exterior applications. Each luminaire also complies with European Directive 89/336/EEC and carries the CE mark. PRODUCTS AVAILABLE Catalogue No. Description BLK 70S 70W high pressure sodium prison luminaire BLK 80M 80W mercury prison luminaire BLK 125M 125W mercury prison luminaire BLK 80QL 80W QL induction prison luminaire Approved by the Home Office for use in HM Prisons and other secure establishments. N.B. Installation of this luminaire is carried out entirely from the rear of the mounting wall. IP54 497 285 390 39 Dimensions Applications The BLOCK range of luminaires is suitable for wall mounting in several different lamp versions. The unique design ensures that all versions are virtually unbreakable and are therefore suited to highly volatile areas where vandalism is prevalent. Such areas could be: High level cell block circulation areas Police stations, prisons and high security areas Circulation areas in high rise council buildings Security lighting applications Maintenance For best results do not use abrasives or highly alkaline cleaners on the fittings. Do not use squeegees, razor blades or other sharp instruments. Do not clean the diffuser in hot sun or elevated temperatures. To remove labels, stickers etc., from the diffuser the use of kerosene, naphtha or white spirit is generally effective. After cleaning a final warm wash should be made using a mild soap solution and ending with a thorough rinse with cold water. Wipe off surface moisture from metalwork. Generally speaking, if the luminaires operate only in the hours of darkness, a re-lamping and cleaning programme every 12 months to 36 months is advisable depending on which type of lamp is used. Standards All luminaires in the BLOCK range are designed and manufactured in accordance with the relevant sections of BS EN 60598. In addition, they comply with the requirements of European Directive 89/336/EEC and carry the CE mark. Each and every fitting undergoes stringent testing in excess of that required under the standard, to ensure that any possibility of luminaires arriving on site in anything other than full working order is kept to an absolute minimum. Technical Advice Our Technical Department would be pleased to advise customers with regard to any technical aspect of Vandalite luminaires. This includes a design service using state-of-the-art computer software, or manual calculations to ensure that each project receives the correct attention for the job. All information, recommendation, or advice contained in this document or given by Vandalite Lighting Ltd., or an of its subsidiaries, affiliates, or authorised representatives, whether written or oral, is given in good faith, to the best of its knowledge, and based on current procedures in effect. The products of Vandalite Lighting Ltd. or if applicable, of its subsidiaries or affiliates are sold subject to Gener a Conditions of Sale printed at the rear of the currentcatalogue or available upon request. Nothing in this or any other document shall alter, vary or supersede, or operate to waive any of the General Conditions of Sale. Each user of the products shall convince themselves, through all available sources (including finished product test ing in its appropriate environment) of the suitability of the products supplied for its own particular purpose. Because actual use of the products by the user is beyond the control of Vandalite Lighting Ltd., its subsidiaries and affiliates, such use is within the exclusive responsibility of the user. Vandalite Lighting Ltd., its subsidiaries and affiliates cannot be held responsible for any loss incurred through incorrect or faulty use of the products. Information, recommendation and / or advice are neither made to infringe on any patents, nor to grant a license under any patent or intellectual property right of Vandalite Lighting Ltd. Or any of its subsidiaries or affiliated companies, nor to grant the right to file for any patent protection. We have a policy of continuous technical development and products and / or descriptions, and / or materials may be changed without prior public announcement or warning. Vandalite Lighting  Ltd. Haley Hill Works Haley Hill Halifax West Yorkshire                  Tel: 01422 354254 HX3 6ED   Fax: 01422 356066 e-mail:enquiries@vandalite.com web site:www.vandalite.com V Vandalite Lighting  Ltd.