V Product Data Sheet Vandalite Lighting Ltd ALBANY : High Bay Industrial Lighting Range Computer designed aluminium reflector Adjustable lamp holder to suit application Various mounting options Excellent Photometric performance Description The ALBANY range of High Bay fittings is suitable for many interior commercial and industrial lighting applications. The aesthetically pleasant body is manufactured from high quality spun aluminium which is given a special resilient textured white EPC paint finish as standard. The ALBANY is also available in other colours to special order. The reflector is manufactured from high quality aluminium and is spun to a computer generated design. In addition, an alternative reflector is available to special order which creates a Mid Bay distribution. The geartray is manufactured from galvanised steel and is designed to be easily maintained. Versions are available using high efficacy discharge lamps such as High Pressure Sodium, Metal Halide and Mercury. The new range of Induction QL lamps can also be used to give up to 20 years between lamp changes. The advantage of the Induction QL lamp is that light output is virtually instantaneous. All luminaires in this range are designed to comply with BS EN 60598 and are suitable for operating in interior applications. Each luminaire also complies with European Directive 89/336/EEC and carries the CE mark. IP20 PRODUCTS AVAILABLE Catalogue No. Description ABY 150S 150W high pressure sodium ABY 250S 250W high pressure sodium ABY 400S 400W high pressure sodium ABY 250MH 250Wmetalhalide ABY 400MH 400W metal halide ABY 250M 250Wmercury ABY 400M 400Wmercury /RLY warm-up relay ALGL flat toughened glass in frame ALPB  polycarbonatebowlattachment Also available  with SON Plus lamps. 50 535 Dimensions Applications The ALBANY range of luminaires is a high quality high bay luminaire suitable for most industrial applications where the mounting height is between 5m and 12m.  Such areas could be: Industrial manufacturing areas Large warehouses Decorative lighting in retail areas Sports halls Shopping malls Bus garages Automated storage areas Airport terminal buildings Maintenance For best results do not use abrasives or highly alkaline cleaners on the fittings. Do not use squeegees, razor blades or other sharp instruments. Do not clean the diffuser in hot sun or elevated temperatures. To remove labels, stickers etc., from the diffuser the use of kerosene, naphtha or white spirit is generally effective. After cleaning a final warm wash should be made using a mild soap solution and ending with a thorough rinse with cold water. Wipe off surface moisture from metalwork. Generally speaking, if the luminaires operate only in the hours of darkness, a re-lamping and cleaning programme every 12 to 36 months is advisable depending on which type of lamp is used. It must be noted that High Pressure Sodium and Metal Halide lamps should be replaced before cycling occurs to prevent damage to the luminaire and control gear. Standards All luminaires in the ALBANY range are designed and manufactured in accordance with the relevant sections of BS EN 60598. In addition, they comply with the requirements of European Directive 89/336/EEC and carry the CE mark. Each and every fitting undergoes stringent testing in excess of that required under the standard, to ensure that any possibility of luminaires arriving on site in anything other than full working order is kept to an absolute minimum. Technical Advice Our Technical Department would be pleased to advise customers with regard to any technical aspect of Vandalite luminaires. This includes a design service using state-of-the-art computer software, or manual calculations to ensure that each project receives the correct attention for the job. All information, recommendation, or advice contained in this document or given by Vandalite Lighting Ltd., or an of its subsidiaries, affiliates, or authorised representatives, whether written or oral, is given in good faith, to the best of its knowledge, and based on current procedures in effect. The products of Vandalite Lighting Ltd. or if applicable, of its subsidiaries or affiliates are sold subject to Gener a Conditions of Sale printed at the rear of the currentcatalogue or available upon request. Nothing in this or any other document shall alter, vary or supersede, or operate to waive any of the General Conditions of Sale. Each user of the products shall convince themselves, through all available sources (including finished product test ing in its appropriate environment) of the suitability of the products supplied for its own particular purpose. Because actual use of the products by the user is beyond the control of Vandalite Lighting Ltd., its subsidiaries and affiliates, such use is within the exclusive responsibility of the user. Vandalite Lighting Ltd., its subsidiaries and affiliates cannot be held responsible for any loss incurred through incorrect or faulty use of the products. Information, recommendation and / or advice are neither made to infringe on any patents, nor to grant a license under any patent or intellectual property right of Vandalite Lighting Ltd. Or any of its subsidiaries or affiliated companies, nor to grant the right to file for any patent protection. We have a policy of continuous technical development and products and / or descriptions, and / or materials may be changed without prior public announcement or warning. Vandalite Lighting  Ltd. Haley Hill Works Haley Hill Halifax West Yorkshire                  Tel: 01422 354254 HX3 6ED   Fax: 01422 356066 e-mail:enquiries@vandalite.com web site:www.vandalite.com V Vandalite Lighting  Ltd.